Defines how the scanner operates when you press the Scan button or activate a laser scanner connected to the Intermec computer. This command has two modes: disable/auto-trigger and enable/one-shot.
Disable/Auto-Trigger mode
In auto-trigger mode, you press the Scan button once or activate the laser scanner once to scan a series of bar codes. When you release the button or trigger, the scanner turns off. To scan the same bar code more than once, you need to release the button or trigger, scan a different bar code before attempting a second scan, or wait until the Identical Consecutive Timeout is over.
Enable/One-Shot mode
In one-shot mode, you need to press the Scan button or activate the laser scanner each time you want to scan a bar code. After you scan a bar code, the scanner turns off.
Enable/One-Shot
Data Collection > Specified Scanner > Scanner Settings > Turn Off After Good Read